The quality Hydrocyclone products consists of a hollow cylinder in the upper part and an inverted cone in the lower part which communicates with the cylinder, and the two constitute the working cylinder of the hydrocyclone. In addition, the quality Hydrocyclone products also has a feeding pipe, an overflow pipe, an overflow conduit and a grit chamber.

The quality Hydrocyclone products uses a sand pump to spin the slurry tangentially into the cylinder at a certain pressure and flow rate, and then the slurry rotates along the cylinder wall at a high speed to generate centrifugal force. Under the action of centrifugal force and gravity, the coarser and heavier ore particles are thrown out.
The quality Hydrocyclone products are mainly used for classification, sorting, concentration and desliming in the mineral processing industry. When the hydrocyclone is used as a classification equipment, it is mainly used to form a grinding and classification system with a mill; when used as a desliming device, it can be used for desliming in a gravity beneficiation plant; Concentrated and sent to fill underground mining tunnels.
The quality Hydrocyclone products has no moving parts and has a simple structure; the production capacity per unit volume is large, and the area is small; the classification efficiency is high (up to 80% to 90%), and the classification granularity is fine; the cost is low, and the material consumption is low.