Instructions for the use and maintenance of the cheapest T Type Meshed Filter:
1. Check the condition of the pressure gauge to see if it works normally.

2. Check the pressure values of pressure gauge 1 and pressure gauge 2 of the T Type Meshed Filter. When the difference between the pressure values of the two pressure gauges exceeds the specified range, the filter screen of the cheapest T Type Meshed Filter should be cleaned. Before cleaning the filter, turn off the pump and stop the water, then rotate the compression handle, remove the filter cover, and take out the filter. Then clean the filter. When cleaning the cheapest T Type Meshed Filter, pay attention to check the condition of the O-ring and gasket. After the cleaning is completed, install each part of the T Type Meshed Filter in place, then test the pressure with boiling water and check the cleaning effect, check whether there is leakage, and observe whether the reading of the pressure gauge is normal.
3. When winter comes, drain the accumulated water in the cheapest T Type Meshed Filter to prevent corrosion.
4. Avoid collision and throwing in the process of loading and unloading the transport filter.
5. Regularly conduct anti-rust treatment on the surface of the cheapest T Type Meshed Filter.