Correct installation of the Cheap Manual T Type Disc Filter material:
Step 1: Installation of the base, be sure to pay attention to the direction of the inlet and outlet before installation. The liquid should flow from the outside of the filter element of the Cheap Manual T Type Disc Filter to the same pipe in the center of the filter socket. When installing the out device, pay attention to the obvious arrow mark on the device, and do not connect it wrongly.Step 2: Different types of Cheap Manual T Type Disc Filter material have different installation methods. If it is a multi-layer filter element, the pressure plate should be placed on the secondary piece, and not pressed too tightly, because the filter element of the Manual T Type Disc Filter will be deformed by heat at high temperature. If the pressure plate is too tight, the filter element cannot be extended and Couldn't filter better.
Step 3: The installed Cheap Manual T Type Disc Filter must be thoroughly cleaned and disinfected before use.
Step 4: When the equipment is running, the exhaust valve at the top of the Cheap Manual T Type Disc Filter material should be opened first, and the gas in the cylinder should be drained and then filled with liquid, which is conducive to better functioning of the filter.