Precautions for the operation of Discount Hydrocyclone products:
1. Select the structural parameters of discount hydrocyclone products according to the separation particle size and the amount of pulp to be processed.
2. Select the appropriate cyclone feeding method.
3. Stabilize the feeding pressure of discount hydrocyclone products. Because the feeding pressure directly affects the processing capacity and classification size of discount hydrocyclone products, the greater the feeding pressure, the higher the slurry flow rate, and the larger the processing capacity of discount hydrocyclone products. The larger the centrifugal force, the finer the classification particle size. After the classification particle size is determined, a certain pressure is required to adapt to it. If the pressure is too high, the fine particles mixed in the sand will increase; if the pressure is too small, the coarse particles mixed in the overflow will increase, which will reduce the classification efficiency.

4. Pay attention to the change of the diameter of the grit chamber of discount hydrocyclone products. When the sand settling port increases, the sand settling volume increases, the mass fraction decreases, the fine particles in the sand settling increase, the overflow volume decreases, and the overflow becomes finer; on the contrary, when the sand settling port decreases, the sand settling mass fraction increases , the coarse particles in the overflow increase, and the overflow volume increases.
5. The ore feeding concentration should be appropriate.