What should I pay attention to when using Venturi Fertilizer For Agriculture Irrigation? Let me take you to find out more.

The normal use process of Venturi Fertilizer For Agriculture Irrigation is:
1. Open the filler valve, add the fertilizer needed to control the crop area to be sprayed into the mixing chamber of the sprinkler fertilizer applicator, then inject clean water, drain the air in the mixing chamber, close the filler valve, open the water inlet valve, the water outlet valve, and spray fertilizer The generator began to feed fertilizer for the sprinkler irrigation system.
2. Adjust the opening angle of the outlet valve or inlet valve. The manufacturer of Venturi Fertilizer For Agriculture Irrigation tells you that the purpose of this is to control the fertilizer supply amount or fertilizer supply time of the sprinkler irrigation and fertilizer applicator.
3. When the fertilizer spraying is finished, close the water inlet valve and slowly open the filling valve. When there is 1/3 of the clean water in the mixing chamber, close the water outlet valve. At this time, fertilizer can be added and the next spray irrigation pipeline fertilization operation program can be started.
4. It is worth noting that if a large amount of fertilizer needs to be sprayed, the batch fertilization method can be used for secondary feeding. The spraying time, the amount of spraying water and the spraying effect that need to be mastered are roughly the same.
When using Venturi Fertilizer For Agriculture Irrigation, pay attention to the following points:
1. The sprinkler irrigation system is operating normally without any problems.
2. After injecting fertilizers, chemicals, etc. into the sprinkler irrigation system, the spraying time should usually be no less than 30min. The purpose of this is to eliminate the problems of slow sprinkler speed and uneven spraying. At the same time, the fertilizer can be fully diluted to make the crop leaf energy. Absorb nutrients better.
3. After the fertilizer spraying is finished, there must be 30-90 minutes for the spraying system to continue running. Rinse the sprinkler irrigation system with clean water, and pour the fertilizer from the leaves of the plants into the root zone of the crops to prevent the fertilizer from damaging the leaves.
Well, the above is the precautions for using Venturi Fertilizer For Agriculture Irrigation, I hope you all understand.