Welcome to Fuzhou Yong Run Irrigation Equipment Co.,Ltd
language
中国
韩国
韩国
韩国
韩国
韩国
Welcome to Fuzhou Yong Run Irrigation Equipment Co.,Ltd
sales@fzyrgg.com  2863862936@qq.com
NEWS
/
/
/
Principle of Venturi Injector

Principle of Venturi Injector

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2021-12-07
  • Views:0

(Summary description)The principle of Venturi Injector is a vacuum acquisition device that uses fluid to transfer energy and mass. It uses a certain pressure of water or gas stream to be sprayed through the nozzle and aggregates in a focal point.

Principle of Venturi Injector

(Summary description)The principle of Venturi Injector is a vacuum acquisition device that uses fluid to transfer energy and mass. It uses a certain pressure of water or gas stream to be sprayed through the nozzle and aggregates in a focal point.

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2021-12-07
  • Views:0
Information

The principle of Venturi Injector is a vacuum acquisition device that uses fluid to transfer energy and mass. It uses a certain pressure of water or gas stream to be sprayed through the nozzle and aggregates in a focal point. Due to the extremely high flow rate of the sprayed water or gas, the pressure energy is converted For speed, the pressure in the suction zone is reduced to produce a vacuum. Several high-speed water streams will grab the sucked gas, pass through the contraction section of the venturi tube and fully mix and compress with the throat diameter, carry out molecular diffusion energy exchange, and balance the speed. After the expansion section, the speed decreases and the pressure increases, which is greater than atmospheric pressure and ejected from the outlet Into the storage tank (pool), the non-condensable gas is separated out, and the device that completes the suction function is called Venturi Injector.

china Venturi Injector company
The manufacturer of Venturi Injector tells you that in this device, two fluids of different pressures are mixed with each other, and energy exchange occurs to form a mixed fluid with a middle pressure. The mixed fluid is divided into gas (vapor) phase, liquid phase, or A mixture of gas (steam), liquid and solid. Before entering the device, the medium with higher pressure is called the working medium. The flow of the working medium is called the working fluid. The working fluid comes out of the nozzle at a high speed and enters the receiving chamber of the ejector , And take away the medium with lower pressure in front of the ejector. The fluid that is taken away is called the ejector fluid. Usually in the ejector, the potential energy or thermal energy of the working fluid is transformed into kinetic energy. Venturi Injector manufacturer tells you Part of the kinetic energy of the working fluid is transferred to the ejector fluid. In the process of flowing along the ejector, the speed of the mixed fluid gradually equalizes, so the kinetic energy of the mixed fluid is turned into potential energy or heat energy on the contrary. The working medium fluid and the ejection medium fluid enter the mixing chamber to balance the speed, usually accompanied by an increase in pressure. The fluid enters the diffuser from the mixing chamber, and the pressure will continue to rise. At the outlet of the diffuser, the mixed fluid The pressure of the ejector is higher than the pressure of the ejected fluid when it enters the receiving chamber. Increase the pressure of the ejected fluid without directly consuming mechanical energy, which is the most important and fundamental performance of the ejector. The Venturi Injector manufacturer tells you that due to this nature, the In many technical departments, the use of ejectors instead of mechanical boosting equipment (compressors, pumps, blowers, induced draft fans, etc.) makes it possible to obtain simpler and more reliable technical solutions.
The Venturi Injector manufacturer tells you that in addition to its very simple structure, the system connecting the ejector to various equipment is also very simple, and the manufacturing is not complicated. It is widely used in engineering. Among them, in the field of power engineering technology. It is mainly used for power generation. .Exhaust gas waste heat heating device, refrigeration, conveying solid loose particles, etc.

Keyword:

Scan the QR code to read on your phone

Latest News
Analysis of irrigation and fertilization techniques in protected area by sandstone laminated filter manufacturers
Analysis of irrigation and fertilization techniques in protected area by sandstone laminated filter manufacturers
Sandstone laminated filter manufacturers talk about the application of underground drip irrigation skills
Sandstone laminated filter manufacturers talk about the application of underground drip irrigation skills
Camellia bonsai how the pan tie shape?
Camellia bonsai how the pan tie shape?

Contact us

Add: Hongkuan Industrial Village, Fuqing City Fuzhou City, Fujian Province, china
Mobile: 86-13959106128(Davis Liu)
Tel: 86-591-87821080, 83366928
Fax: 86-591-22212272

 

 

Copyright © Fuzhou Yong Run Irrigation Equipment Co.,Ltd Powered by www.300.cn 闽ICP备12019643号

Share:
img
img
img
img
img
img