In the production process, the process operation factors that affect the working efficiency of China hydrocyclone products mainly include ore feeding, overflow and sand discharge, this requires the hydrocyclone operators to improve their skills during the production process and maintain the operating parameters of each process, keep the operating parameters of each process within a reasonable range to ensure the stable operation of the hydrocyclone.

1. Feeding pressure, concentration, particle size composition
The feeding pressure mainly affects the processing capacity and classification size of China hydrocyclone products. The feeding pressure is increased, the slurry flow rate is accelerated, the influence of viscosity is reduced, and the classification effect of China hydrocyclone products is improved. When dealing with coarse-grained materials, most plants use a low pressure of 49-98KPa, while when dealing with fine-grained and muddy materials, a high pressure of 98-294KPa is used.
The ore feeding concentration and its particle size composition will directly affect the concentration and particle size of the final product. The particle size of the product is coarser.
2. Discharge of overflow and grit
The ideal working state of China hydrocyclone products should be that the sand is sprayed out in an umbrella shape. Therefore, the angle of the umbrella surface should not be too large, and it is appropriate to just spread out. When used for concentration operations, the sand is discharged in a rope shape with a higher concentration. When used in dewatering operations, the sand is discharged in a larger umbrella shape, and the overflow has the least solid content.