The Venturi Fertilizer For Agriculture Irrigation factory said that the Venturi fertilizer applicator is composed of several parts such as valve, venturi, tee, elbow, etc. It is enough to open these parts when in use. If not, close the water inlet valve and the water outlet valve.

The Venturi Fertilizer For Agriculture Irrigation factory shares the process of using the Venturi fertilizer applicator:
(1) Open the filling valve, add the fertilizer needed to control the crop area to be sprayed at one time into the mixing chamber of the sprinkling fertilizer applicator, then inject clean water, drain the air in the mixing chamber, close the filling valve, open the water inlet valve and the water outlet valve, sprinkle irrigation The fertilizer applicator begins to supply fertilizer to the sprinkler system.
(2) Adjust the opening angle of the outlet valve or inlet valve. The Venturi Fertilizer For Agriculture Irrigation factory explained that the purpose of this is to control the amount or time of fertilizer supplied by the sprinkler fertilizer applicator.
(3) When the fertilizer spraying work is finished, close the water inlet valve, slowly open the filling valve, and close the water outlet valve when the remaining 1/3 of clean water in the mixing room is completed. At this time, fertilizer can be added and the next fertilization operation procedure of the sprinkler irrigation pipeline can be started.
(4) The Venturi Fertilizer For Agriculture Irrigation factory reminds that if a large amount of fertilizer needs to be sprayed, the batch fertilization method can be used for secondary feeding. The fertilizer spraying time, water amount and fertilizer spraying effect that need to be mastered are roughly the same.