The Venturi Fertilizer For Agriculture Irrigation factory stated that the realization of any water-saving irrigation method cannot be achieved by only one component. It is necessary to connect a variety of irrigation equipment and work together to achieve water-saving irrigation. Venturi fertilization device is no exception. Venturi Fertilizer For Agriculture Irrigation factory said that when using the Venturi fertilizer applicator, it needs to be connected between the water inlet of the sprinkler pump and the suction pipe for fertilization and fertilization.

When using the Venturi fertilizer, the Venturi Fertilizer For Agriculture Irrigation factory reminds the following points:
1. The sprinkler irrigation system is operating normally without any problems.
2. After injecting fertilizers, chemicals, etc. into the sprinkler irrigation system, the fertilizer spraying time should usually not be less than 30 minutes. Venturi Fertilizer For Agriculture Irrigation factory explained that the purpose of this is to eliminate the problems of slow speed of the sprinkler and uneven spraying, and at the same time, the fertilizer can be obtained. Fully diluted, so that the crop leaves can better absorb nutrients.
3. After the spraying of the fertilizer liquid, there should be 30-90 minutes for the spraying system to continue to operate. Rinse the sprinkler irrigation system with clean water, and pour the fertilizer from the leaf surface of the plant into the root zone of the crop to prevent the fertilizer liquid from hurting the leaf surface.
The above are the precautions for use shared by the Venturi Fertilizer For Agriculture Irrigation factory.